For linux, 3 for linux – Toshiba Magnia Z500 User Manual
Page 37
12.
When upgrade the driver files is completed, the following screen is displayed.
Push the [Finish] button.
13.
The following screen is displayed. Reboot the system.
14.
Activate the [Add/Remove Programs] icon on the Control Panel. Remove the MAGNIA
Software Access Point.
15.
Activate Setup.exe in the \Public\LAN\Toshiba\TSAP\AP on the Server Setup Tool
installation CD. Subsequently, follow the installer’s instructions.
16.
Set up the required items in the Access Point Configuration Utility.
[3.2 Access Point Configuration Utility (Local)]
17.
Select the wired LAN network that you want to connect to in the Wired LAN Selection
Utility.
[3.4 Wired LAN Selection Utility]
2.1.3.3 For Linux
See the following section.
2.1.1.3 For installation in Linux