Toshiba Magnia Z500 - Manual (Page 96)

[For Linux]
In order to communicate with an Access Point Configuration Utility (the Windows version), it is necessary to
install SNMP Agent. SNMP Agent is installed simultaneously when the OS is installed with full installation
type.
The settings for communication with the Access Point Configuration Utility are as follows.
1. Access the following URL from the WEB browser.
http://(server IP address)/tsb/tsb_snmp.cgi
Then, the following setup page is displayed.
Memo
As explained above, you need to undergo user authentication before accessing this page.
Memo
The setup page that can be accessed by the above URL operates, assuming that the WEB
server (apache), attached as a standard feature, is operating without any setting change. If the
WEB server's settings have been changed, an access failure or abnormal operation may occur.
For the WEB server settings, consult with your server administrator.