Sharp MX-M264N User Manual

Page 228

Advertising
background image

2-130

COPIER

Contents

STORING COPY OPERATIONS (Job Programs)

A job program is a group of copy settings stored together. When copy settings are stored in a job program, the settings
can be retrieved and used for a copy job by means of a simple operation.
For example, suppose A3 (11" x 17") size CAD drawings are copied once a month for archive purposes using the
following settings:

(1) The A3 (11" x 17") size CAD drawings are

reduced to A4 (8-1/2" x 11") size.

(2) The drawings have fine lines that do not

show clearly, and thus a dark exposure
setting (level 4) is used.

(3) To reduce paper use by half, 2-sided

copying is used.

(4) Margin shift is used so that holes can be

punched for filing.

When a job program is not stored

When a job program is stored

Set A3 (11" x 17") to A4 (8-1/2" x 11") reduction

Change the exposure setting

Select 2-sided copying

Select margin shift

Press the [START] key.

Press the [#/P] key (

).

Touch the stored program key.

Press the [START] key.

Considerable time is required to copy the drawings each
month because the above settings must be selected.
In addition, mistakes are occasionally made when selecting
the settings, so some copies must be redone.

The settings are stored in a job program, so they can be
selected by the touch of a key. This is simple and takes no time.
In addition, the settings are all stored so there are no chances
for mistakes, and thus no need to redo copies due to setting
mistakes.

• Up to 48 job programs can be stored. The job programs are retained even if an interruption occurs in the power supply.

• Job programs can also be stored in the Web pages. Click [Job program] and then [Copy] in the Web page menu to store a

job program.

A3 (11" x 17") size CAD drawings

Copies

Exit

Job Programs

Press program number.

1

2

3

Recall

Store/Delete

1
4

4

5

6

7

8

9

10

11

12

Advertising
This manual is related to the following products: