Sharp MX-M264N - Manual (Page 691)

7-59
SYSTEM SETTINGS
Contents
Card area settings
The data check during card reading can be set.
Settings
Card type/Reader settings
The authentication of Felica, HID and other IC cards can be set.
Settings
Card Setting
(when the HID card reader is available.)
Configure this setting if user authentication will be performed using an HID card.
Card Reader Device Registration
In this setting, the product ID and vender ID of the connected HID card reader are displayed. To store the HID card
reader, touch the [Read] key.
* For settings that enable an HID card to be used, consult your service technician.
Item Description
Check Facility Code in HID Mode Checks the facility code of the HID card.
Facility Code Enter the facility code of a HID card. When you tap the [Store] key, the facility code is stored.
Import from Configuration file Enter the configuration file name and tap the [Execute] key, and the card area settings will
be read from the configuration file.
Card reading test When you tap the [Execute] key, the card reader test starts and the test result is displayed.
Item Description
Use IC Card for Authentication The authentication of Felica, HID and other IC cards can be set.