Sharp MX-M264N - Manual (Page 665)

7-33
SYSTEM SETTINGS
Contents
*1 This cannot be set on the machine. Set this in the system settings in the Web pages.
*2 When the Internet fax expansion kit is installed.
*3 When the facsimile expansion kit is installed.
*4 When the application integration module is installed.
*5 When the hard disk expansion kit is installed.
Device Control
X Operation from Specified PC
7-66
‹Operational Authority Prohibited
‹Hostname or IP Address of PC –
‹View Password Entry Screen Display in Both PC and MFP
X Operation by User who Has Password
‹Operational Authority Prohibited
‹View Password Entry Screen Display in Both PC and MFP
N Soft Keyboard Template Setting – 7-66
Item Factory default setting Page
P Device Control
7-67
N Other Settings 7-67
X Original Feeding Mode All Disabled 7-67
X Auto Paper Selection Setting Plain Paper 7-67
X Tandem Connection Setting
7-67
‹IP Address of Slave Machine 0.0.0.0
‹Port Number 50001
‹Disabling of Master Machine Mode Disabled
‹Disabling of Slave Machine Mode Disabled
X Detect Standard in Auto Colour Mode 3 7-67
X Optimization of a Hard Disk * 1 – 7-67
X Clear All Job Log Data * 1 – 7-67
N Original Size Detector Setting
7-68 X Original Detection Size Combination Varies depending on country and region
X Cancel Detection at Document Glass Disabled
N Disabling of Devices 7-69
X Disabling of Document Feeder * 2 Disabled 7-69
X Disabling of Duplex Disabled 7-69
X Disabling of Optional Paper Drawer * 3 Disabled 7-69
X Disabling of Tray Settings Disabled 7-69
X Disabling of Finisher * 4 Disabled 7-69
X Disabling of Offset Disabled 7-69
Item Factory default setting Page