Sharp MX-M264N - Manual (Page 667)

7-35
SYSTEM SETTINGS
Contents
* When the automatic document feeder is installed.
Network Settings
X Disabling of Bypass-Tray in Duplex Copy Disabled 7-72
X Disabling of Auto Paper Selection Disabled 7-72
X Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-72
X 600dpi x 600dpi Scanning Mode for Document Feeder * Disabled 7-72
X Quick Scan from Document Glass Enabled 7-72
X Auto Clear Before Copy Job Execution Disabled 7-72
Item Factory default setting Page
P Network Settings
7-73
N IPv4 Settings DHCP 7-73
N IPv6 Settings Disabled 7-73
N Enable TCP/IP Enabled 7-73
N Enable NetWare Disabled 7-73
N Enable EtherTalk Disabled 7-73
N Enable NetBEUI Disabled 7-73
N Reset the NIC – 7-73
N Ping Command – 7-73
Item Factory default setting Page