Brother Sewing Manching - Manual (Page 81)

72
MAINTENANCE
MANTENIMIENTO
ENTRETIEN
No Page 8
Foot controller is not
used correctly.
MACHINE IS
NOISY OR SLOW
MACHINE DOES
NOT START
CONTACT YOUR LOCAL SERVICE CENTER
FABRIC DOES
NOT FEED
PROPERLY
No Page 16
Stitch Length Dial is
set at no feeding.
("0")
No Page 69 No Page 5
Lint is clinging to the
bottom of the needle
plate.
Power supply plug is
removed from outlet.
No Page 33
The combination of
needle size/thread
size/fabric is
incorrect.
No Page 7
Main power switch
is turned off.
No Page 9
Inferior needle is
used.
No Page 21
The bobbin winder
shaft is slid to the
right.
No Page 25
Thread is tangled.
No Page 18
Feed Dog Position
Switch in down
position.
No Page 47
The buttonhole lever
is pushed toward
the back of the
machine.
NEEDLE
BREAKS
No Page 9
Needle is not
correctly inserted.
No Page 9
Inferior needle is
used.
No Page 33
The combination of
needle size/thread
size/fabric is
incorrect.
No
Fabric is pulled
excessively. Let the
feed dogs move the
fabric. Do not pull
the fabric.