Philips AVENT Comfort Double electric breast pump SCF334-04 Two 4oz bottles and nipples +travel bag More milk in less time User Manual
Page 13
2 Heat the bottle or storage cup with defrosted or refrigerated breast milk in a bowl of hot water
or in a bottle warmer.
3 Remove the screw ring and sealing disc from the bottle or remove the lid from the storage cup.
4 If you are using a storage cup, screw the adapter ring onto the cup.
5 Screw a sanitized screw ring with sanitized teat onto the bottle or onto the storage cup with
adapter ring.
do’s
- Always check the temperature of the milk before you feed it to your baby.
- Always discard any breast milk that is left over at the end of a feed.
don’ts
- Never heat breast milk in a microwave, as this can cause uneven heating, which can lead to hot
spots in the milk. It may also destroy nutrients in the milk.
Cleaning and sanitizing
The motor unit, the silicone tube and cap and the adapter do not require cleaning and sanitizing, as
they do not come into contact with breast milk.
Clean and sanitize all other parts of the breast pump before first use. Also clean these parts after
each subsequent use and sanitize them before each subsequent use.
Danger: Never put the motor unit or the adapter in water or in a sanitizer.
1
Disassemble the breast pump completely. Also remove the white valve.
Be careful when you remove the white valve and when you clean it. If it gets damaged, your
breast pump does not function properly. To remove the white valve, gently pull at the ribbed tab
on the side of the valve.
2
Clean all parts, except the motor unit, the silicone tube and cap and the adapter, in the
dishwasher (on the top rack only) or in hot water with some mild washing-up liquid and then
rinse them thoroughly.
To clean the valve, rub it gently between your fingers in warm water with some washing-up
liquid. Do not insert objects into the valve, as this may cause damage.
3
Sanitize the cleaned parts of the breast pump in a Philips AVENT steam sanitizer or by boiling
them for 5 minutes.
Never put the motor unit or the adapter in water or a sanitizer. If necessary, you can wipe the
motor unit with a soft, damp cloth.
EngliSh
13