Philips SE6581B-17 - Manual (Page 27)

25 Getting started
1
Place the handset on the charging
cradle of the base station. A beep is
emitted if the handset is placed
correctly.
2
The battery icon on the display
blinks during charge.
3
The battery icon becomes steady
when the handset is fully charged.
Optimal battery life is reached after 3
cycles of complete charging (over 15
hours) and discharging, allowing
approximately 12 hours of talk-time and
150 hours of stand-by time.
The indoor and outdoor range of the
phone is up to 50 metres and 300 metres
respectively. When the handset moves
beyond the operation range, the antenna
icon
will blink.
When you reach the range limit the
conversation may become crackly. Move
closer to the base.
7.4 Remove/Attach belt clip
A belt clip allows you to carry your
handset on your belt.
1
To remove the belt clip, simply pull
the clip away from the handset.
2
To attach the belt clip to your
handset, fit the tabs on the belt clip
into the slots at the back of the
handset and push into place.
7.5 Install optional headset
Your phone may be used with an optional
headset (not included in the box). To use
this feature, insert the headset plug into
the headset jack. Your phone is ready for
hands-free conversations.
7.6 Power up
On the base, the screen below is shown
during power up.
The handset will start searching and the
backlight will turn on.
Note
Tip
Diameter: 2.5 mm
Please Wait...
Welcome
01/01/2008
TUE 00:01 AM