Philips SE6581B-17 - Manual (Page 49)

47 Personal settings
12 Personal settings
12.1 Change the Handset Name
(Handset only)
You can name the handset and display the
handset name in idle mode. The default
handset name of your handset is Philips.
1
Press
m in idle mode, scroll n to
Personal Set and press
o
Select.
2
Handset Name is highlighted.
Press
o Select.
3
The last stored name is displayed.
Press
c Clear to delete the
characters one by one or a long
press to delete all.
4
Enter the new name and press
o
OK to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
12.2 Ring Settings
12.2.1 Set the Ring Volume
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear as the
volume of the ringing tone may damage
your hearing.
You can set the ring volume
independently for each registered
handset, as well as the base station.
Handsets have 5 ringer volume levels,
plus progressive and off. The base station
has 5 ringer volume levels plus off. The
default setting for both handsets and the
base station is level 3.
To adjust ring volume on the
handset:
1
Press
m in idle mode, scroll n to
Personal Set, and press
o
Select.
2
Scroll
n to Handset Tones and
press
o Select. Ring Volume is
highlighted. Press
o Select.
3
Scroll
n to your desired volume
level. The ring tone sounds at each
level.
4
Press
o OK to confirm.
• A validation tone is emitted and
the screen returns to the
Handset Tones menu.
To adjust ring volume on the base
station:
Press
+ or - in idle mode.
If ring volume is set to off, the icon
will be displayed on the screen.
If ring volume is set to progressive
(handset only), the ringer will start at level
1 and go up one level volume every ring.
12.2.2 Set the Ring Tones
There are 15 ring tones available on your
handset, and 5 ring tones available for the
base.
1
Press
m in idle mode, scroll n to
Personal Set, and press
o
Select.
Danger
Note