Philips SE6581B-17 - Manual (Page 35)

33 Using your phone
8 Using your phone
8.1 Make a call
8.1.1 Predialling
1
Enter the number. (A maximum of
24 digits including * and # are
allowed. Press
c Clear to delete
the last digit.) Or long press to
delete all.
2
From the handset: Press
t. (Or
press
l on the handset to start a
call in speaker mode.)
From the base: Press
l.
• The call is initiated.
8.1.2 Direct dialling
1
From the handset: Pick up the
handset and press
t. (Or press
l on the handset to start a call in
speaker mode.)
From the base: Press
l.
2
Dial the number.
• The call is initiated.
8.1.3 Call from redial list
1
Press
r in idle mode.
2
Scroll
n to an entry in the redial
list.
3
Press
t or l (or l on the
base station).
• The call is initiated (with
loudspeaker on if from the base
station).
• The handset(s) and base station each
have their own redial list.
• You can also press
t or l (or
l on the base station) first and
then press
c Redial to enter the
redial list. Then scroll
n to select a
number in the list and press
o
Select. The number is dialed
automatically.
8.1.4 Call from the call log
• The call log is shared between
handset(s) and the base station.
• You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log. See section 11.1 - “Access the
Call log”.
1
Press
u in idle mode, then scroll
n to an entry in the call list.
If the list is empty, then “List Empty” is
displayed.
2
Press
t or l (or l on the
base station).
• The call is initiated (with
loudspeaker on if from the base
station).
8.1.5 Call from the phonebook
1
Press
d in idle mode.
2
Scroll
n to a phonebook entry.
3
Press
t or l (or l on the
base station).
• The call is initiated.
Note
Note
Note