Philips SE6581B-17 - Manual (Page 48)

46 Using the Call log
the caller’s number or name in the call
log (see section 11.1 - “Access the Call
log”).
When you store an incoming number in
the phonebook, the digits of the number
will be saved exactly as they appear on
the screen.
If the first 3 digits of the incoming
number corresponds to the local area
code set in your phone, they will be
filtered automatically when you press the
t or l on the handset (or l on
the base station) to dial. To change the
local area code, see section 13.9 - “Set
Area Code”.
11.2 Save call list entry into the
phonebook
1
Press
u in idle mode, then scroll
n to select an entry and press o
Menu.
2
Scroll
n to Save Number and
press
o Select.
3
Enter Name is displayed on the
screen. Enter the name of the
contact (maximum 14 characters)
and press
o OK.
4
Enter Number is displayed and
the selected number from the call
list appears in the number field. At
this time you can edit the number if
you wish to.
5
Press
o OK.
• A confirmation tone sounds and
the screen returns to call log.
Press
c Clear to delete the last digit
or character entered or long press to
delete all.
11.3 Delete a call list entry
1
Press
u in idle mode, then scroll
n to select an entry and press o
Menu.
2
Scroll
n to Delete and press o
Select.
3
Delete? is displayed on the screen.
Press
o OK to confirm deletion.
• A validation tone is emitted, the
call list entry is deleted, and the
display goes to the next entry in
the call list.
Press
c Back to discard the deletion.
The screen returns to the Call List
menu.
11.4 Delete all call list entries
1
Press
u in idle mode, then press
o Menu.
2
Scroll
n to Delete All and press
o Select.
3
Delete All? is displayed on the
screen. Press
o OK to confirm
deletion.
• A validation tone is emitted. The
display shows List Empty for 2
seconds and returns to the idle
mode.
Note
Note