Philips SE6581B-17 - Manual (Page 55)

53 Advanced settings
13.6.1 Easy registration
1
Insert the unregistered handset in
the base station to automatically
begin registration.
2
Registering… is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
The easy registration is possible only
when PIN has not been changed and is
still the default PIN 0000.
13.6.2 Manual registration
1
On the base station, press and hold
a for 3 seconds. A beep sounds to
indicate that the base is ready to
accept registration.
If no action is taken on the handset
within 90 seconds, the registration
procedure will be aborted. If this
happens, repeat from Step 1.
2
On the handset, press
m, scroll n
to Advanced Set and press
o
Select.
3
Scroll
n to Register and press o
Select.
4
Enter the PIN when prompted and
press
o OK to confirm.
Registering… is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset number (1 to 8) will be
assigned by the base
automatically.
13.7 Unregister
1
Press
m in idle mode, scroll n to
Advanced Set and press
o
Select.
2
Scroll
n to Unregister and press
o Select.
3
Enter the PIN when prompted and
press
o OK to confirm.
4
Scroll
n to select the handset
number to unregister and press
o
Select. Press
o OK to confirm.
• A validation tone is emitted to
indicate successful unregistration.
You can only use a SE658 handset to
unregister a handset that does not
belong to the SE658 range.
13.8 Reset Unit
You can reset your phone to its default
settings with this feature. (see 13.14
“Default Settings”)
Upon reset, all your personal settings,
call log and redial list entries will be
deleted and the phone will return to its
default settings. However, your
phonebook will remain unchanged after
reset.
You may have to configure your phone
once again.
Note
Note
Note
Caution
Note