OR-Fab 83664 TJ WRANGLER HD FULL WIDTH FRONT WINCH BUMPER - Manual (Page 2)

2 83664 - 83665
Install kit
1. Stock front bumper.
a. Unplug foglight harness.
b. Remove four torx bolts and tow hooks.
c. Remove two torx bolts from underside of
bumper.
d. Remove stock bumper from vehicle.
2. Winch. (Skip this step if not installing a winch)
a. Mount winch onto bumper at this time. (Using
hardware provided by Winch Mgf.)
3. Front kit bumper.
a. Install kit bumper on frame using six original
fasteners or kit bolts (1/2”) provided.
b. If equiped, finish installing your winch and cables
at this time.
Kit Parts List
Qty. Description
1 Bumper, front
2 D-Ring, front
1 ZH83664
6 Bolt, 1/2”-13 x 1 1/4”
6 Washer, 1/2” SAE Hardend
NOTE
If you are installing a winch, mount the winch onto the
bumper before installing bumper onto frame rails.
Winch
Copyright 03/14
Performance Automotive Group
www.p-a-g.net