ARB 3413190 - Manual (Page 10)

29/04/08 Page 10 of 13 3786407
34. Before fitting bar to chassis brackets
on vehicle, cable tie all winch power
cables well clear of all moving parts.
When bar is fitted to vehicle, fit leads to
battery and cable tie clear of all moving
parts.
35. Fit 6mm caged nuts into square holes
in lower section of bar.
36. With the help of a friend, lift bar in
between the chassis brackets and
secure to caged nuts using 10mm x
30mm bolts, large HD washers and
spring washers.