ARB 3413190 - Manual (Page 11)

29/04/08 Page 11 of 13 3786407
37. Adjust bar so there is a 15mm plus
gap around the periphery of the
front of the vehicle.
38. Tighten all 4 bolts until the washers
start to deform.
39. Using a 10mm drill bit. Drill out
pinning holes using holes in bar as a
template. Secure using 10mm x
30mm bolts, washers and 10mm
nuts. Tighten all bolts firmly.
40. Top hole through light aperture in
bar
41. Lower hole through bottom of bar
upright.