ARB 3413050 - Manual (Page 4)

03/12/04 Page 4 of 11 3782893
ASSEMBLY SEQUENCE FOR BULLBAR.
4. 1. Using a long screwdriver insert it through the
bottom hole so it passes through the tube packer.
This may require a visual check from under the
vehicle to see the position of the tube.
2. Using the screwdriver twist around until the packer
is inline with the top hole.
5. 1. Insert the M12 X 200mm bolt through the top hole
using one of the 10mm thick packers. Push through
while removing the screwdriver from underneath
until the bolt locates right through.
Note: For turbo diesel models remove the intercooler
hose to gain access for the M12 X 200mm bolt.
6. 1. Fasten the remainder of the mount using:
2 M14 bolts removed earlier from tow bracket
2 M14 bolts from fitting kit
6 M14 flat washers
4 M14 spring washers
2 10mm thick packers
2 M12 nuts
2 M12 spring washers
Note: Assemble with the tow brackets.