ARB 3413050 - Manual (Page 8)

03/12/04 Page 8 of 11 3782893
ASSEMBLY SEQUENCE FOR BULLBAR.
13. 1. Next step is to lock pin the bar so there is no
movement by drilling a 10mm hole on both sides of
vehicle, fasten with 10mm x 25mm bolts plus 10mm
hardware.
14. (If fitting with winch)
1. Feed the winch cable through the roller fair lead.
Mount the hook to the end of the cable.
15.
Fitting with winch
Fitting without winch
(If fitting with winch.)
1. Bolt the number plate to the number plate bracket
using the M6 bolts and M6 flange nuts.
2. Bolt the assembly to the bar as shown in the
illustration using the M6 bolts and M6 flange nuts.
(If not fitting with winch.)
1. Bolt the number plate through the top holes using
M6 X 16mm bolts and M6 flange nuts.