Fitted product, Fitting bull bar to vehicle – ARB 3462040 User Manual
Page 31
Last Rev Date: 24/07/07
Page 14 of 14
Fitting instructions# 3783178
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
FITTING BULL BAR TO VEHICLE
40. Wire up the indicator and clearance
lamp assemblies. Use scotch locks to
splice cables to existing indicator and
clearance lamp wiring and cable tie
securely.
41. If fog lights are to be installed, mount
positions are on lower pan area between
winch opening and high lift jack position.
Refer to the Warn winch manual for
vehicle wiring instructions.
Ensure that electrical cables are installed
well clear of sharp, hot or moving
objects. Secure the winch cables to the
vehicle and winch bumper with the
supplied cable ties.
FITTED PRODUCT