Fitting mounting brackets – ARB 3462040 User Manual
Page 8
Advertising
Last Rev Date: 24/7/07
Page 7 of 16
Fitting instructions# 3783176
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
FITTING MOUNTING BRACKETS
8. Fit cage nuts to bracket tangs as shown
9. Position the mount brackets as shown on
the ends of the chassis rails (LHS shown).
Loosely fit an M12 bolt and washer set to
top bolt position and lower position as
shown finger tight only.
10. Partly withdraw M12 x 150 bolt and fit
crush sleeve over bolt body inside chassis
as shown. Fit flat and spring washers, and
nut. Do not tighten.
Sleeve in position
Inserting sleeve
Advertising