ARB 3462040 - Manual (Page 37)

Last Rev Date: 24/07/07 Page 6 of 14 Fitting instructions# 3783178
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
FITTING MOUNTING BRACKETS
6. Fit the mount brackets as shown, to the
end of the chassis rails, top M12 bolt and
washer set as shown finger tight only.
7. Slide in ‘L’ shaped packer oriented as
shown
8. Fit M12 bolt, spring washer and Dia
13.0x30x3 large washer into tow hook thread,
insert M12 bolt and washer set in pinning
hole to line up packer hole. Tighten up lower
bolt.
9. Remove loose bolt from pinning hole and
drill through using Dia12.0 drill. Then insert
and do up M12 bolt set.
Warning: Drilling operations can result
in flying metal debris, safety glasses
should be worn.