ARB 3462020 User Manual
Page 23
11/10/05
Page 9 of 14
3783176
2.5 Screw in the eyebolt using the large
washer. Eyebolt can be positioned to sit
vertically by rotating the large nut to the
correct position.
NOTE: EYEBOLTS SHOULD BE REMOVED
FOR SAFETY REASONS WHEN
TRAVELLING ON PUBLIC ROADS.
2.6 When the large nut is in its final position,
secure with the nut retaining bracket using
an M6 bolt, washer and flange nut.
2.7 Secure the number plate bracket using M6
bolts, flat washers and flange nuts. Attach
the longer flange to the bullbar and the
shorter flange to the number plate.
2.8 Fit the M8 cage nuts to the square holes in
the wing brace on the LHS (washer bottle
side) of the bull bar. The body of the cage
nuts are to be on the inside of the brace.
These nuts are to be used to fasten the
washer bottle protection arm to the bull bar.