ARB 3462020 User Manual
Page 41
11/10/05
Page 13 of 14
3783177
4.4 Fit inner guard plates to ends of bull bar
wings and fasten with M6 black screws
and washers.
4.5 If fitting with winch
With the winch cable through the roller fair
lead. Mount the hook to the end of the
cable.
4.6 Wire up the indicator and clearance lamp
assemblies. Use scotch locks to splice
cables to existing indicator and clearance
lamp wiring and cable tie securely.
If fog lights are to be installed, mount
positions are on lower pan area between
winch opening and high lift jack position.
Refer to the Warn winch manual for
vehicle wiring instructions.
Ensure that electrical cables are installed
well clear of sharp, hot or moving objects.
Secure the winch cables to the vehicle
and winch bumper with the supplied cable
ties.