ARB 3462020 User Manual
Page 47
Advertising
11/10/05
Page 5 of 13
3783177
1.4 Remove and replace tow hooks on
opposite chassis sides. Note, the hole
underneath the chassis may need to be
elongated to allow the bolt to fit into the
rear underside position. Leave the outer
bolt off.
1.5 Fit the mount brackets as shown, to the
end of the chassis rails, top M12 bolt and
washer set as shown finger tight only.
1.6 Slide in ‘L’ shaped packer oriented as
shown
1.7 Fit M12 bolt, spring washer and Dia
13.0x30x3 large washer into tow hook
thread, insert M12 bolt and washer set in
pinning hole to line up packer hole.
Tighten up lower bolt.
Remove loose bolt from pinning hole and
drill through using Dia12.0 drill. Then
insert and do up M12 bolt set.
Advertising