ARB 3462020 User Manual
Page 55
Advertising
11/10/05
Page 13 of 13
3783177
4.5 Wire up the indicator and clearance lamp
assemblies. Use scotch locks to splice
cables to existing indicator and clearance
lamp wiring and cable tie securely.
If fog lights are to be installed, mount
positions are on lower pan area between
winch opening and high lift jack position.
Refer to the Warn winch manual for vehicle
wiring instructions.
Ensure that electrical cables are installed well
clear of sharp, hot or moving objects. Secure
the winch cables to the vehicle and winch
bumper with the supplied cable ties.
Advertising