AEM 30-3812 Infinity Plug & Play Harnesses - Ford Coyote to Ford Racing Controls Pack - Manual (Page 10)

10
© 2014 AEM Performance Electronics
P/N 30-3812
upgrade. Disconnect the 12 volts
signal after the update.
C1-10 +12V_R8C_CPU
Ford
Racing
PCM70 -
62 and 2P
"Flash
Enable" -
1
KAPWR / 12VHAAT
Dedicated power
management CPU
Full time battery power. MUST be
powered before the ignition switch
input is triggered (See C1-65).
C1-11 Coil 4
5P "Coil
Driver 1" -
5
Coil on Plug Assembly
4 (COP-D)
25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
C1-12 Coil 3
5P "Coil
Driver 1" -
4
Coil on Plug Assembly
3 (COP3F)
25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
C1-13 Coil 2
5P "Coil
Driver 1" -
2
Coil on Plug Assembly
2 (COP2H)
25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
C1-14 Coil 1
5P "Coil
Driver 1" -
1
Coil on Plug Assembly
1 (COP1A)
25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
C1-15 Coil 6
5P "Coil
Driver 2" -
2
Coil on Plug Assembly
6 (COP6E)
25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
C1-16 Coil 5
5P "Coil
Driver 2" -
1
Coil on Plug Assembly
5 (COP5B)
25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
C1-17
LowsideSwitch_
2
Ford
Racing
PCM70 -
18
Fan Relay Control
Lowside switch, 4A max,
NO internal flyback
diode.
See Setup Wizard Page "LowSide
Assignment Tables" for configuration
options. See 2D table "LS5_Duty [%]"
for activation settings. See Setup
Wizard page 'User GPOs' for default
activation criteria.
C1-18
LowsideSwitch_
3
Engine
E - 2
Variable Camshaft
Timing 11 Solenoid
(Passengerside
Intake)
Lowside switch, 4A max
with internal flyback
diode. Inductive load
should NOT have full time
power.
'See Setup Wizard Page "LowSide
Assignment Tables" for configuration
options. See 2D table "LS3_Duty [%]"
for activation settings. See Setup
Wizard page 'VVC' for options.
C1-19 AGND_1
Ford
Racing
PCM70 - 2
and AUX -
3
IAT and AUX
Sensor Ground
Dedicated analog ground Analog 0-5V sensor ground
C1-20 AGND_1
Engine
E - 32
Digital Cams Ground
(E-SIGRTN)
Dedicated analog ground Analog 0-5V sensor ground
C1-21
Crankshaft
Position Sensor
Hall
---
Crankshaft Position
Sensor Hall
10K pullup to 12V. Will
work with ground or
floating switches.
See Setup Wizard page 'Cam/Crank'
for options.
C1-22
Camshaft
Position Sensor
1 Hall
Engine
E - 41
Camshaft Position
Bank 1 (Passenger
Intake) (CMP11)
10K pullup to 12V. Will
work with ground or
floating switches.
See Setup Wizard page 'Cam/Crank'
for options.