AEM 30-3812 Infinity Plug & Play Harnesses - Ford Coyote to Ford Racing Controls Pack - Manual (Page 24)

24
© 2014 AEM Performance Electronics
P/N 30-3812
51 Coil 7 4P "Coil Driver
2" - 1
Ignition Coil on
Plug Assembly 7
(COP7G)
25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
52 Coil 2 4P "Coil Driver
1" - 3
Ignition Coil On Plug
Assembly 2 (COP2H) 25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
53 Injector 1 C1-63 Fuel Injector Driver
1 (INJ1)
Saturated or peak and
hold, 3A max
continuous
Injector 1
54 Injector 2 C1-62 Fuel Injector Driver
2 (INJ2)
Saturated or peak and
hold, 3A max
continuous
Injector 2
55 Injector 3 C1-59 Fuel Injector Driver
3 (INJ3)
Saturated or peak and
hold, 3A max
continuous
Injector 3
56 LowsideSwitch_6 C1-3 Variable Camshaft
Timing 12 Solenoid
(Passengerside
Exhaust)
Lowside switch, 4A max
with internal flyback
diode. Inductive load
should NOT have full
time power.
'See Setup Wizard Page "LowSide
Assignment Tables" for
configuration options. See 2D table
"LS6_Duty [%]" for activation
settings. See Setup Wizard page
'VVC' for options.
57 LowsideSwitch_7 C2-44 Variable Camshaft
Timing 22 Solenoid
(Driverside
Exhaust)
Lowside switch, 4A max
with internal flyback
diode. Inductive load
should NOT have full
time power.
'See Setup Wizard Page "LowSide
Assignment Tables" for
configuration options. See 2D table
"LS7_Duty [%]" for activation
settings. See Setup Wizard page
'VVC' for options.
58 --- --- --- --- ---
59 --- --- --- --- ---
60 --- --- --- --- ---
61 --- --- --- --- ---
62 Injector 4 C1-58 Fuel Injector Driver
4 (INJ4)
Saturated or peak and
hold, 3A max
continuous
Injector 4
63 Injector 5 C1-57 Fuel Injector Driver
5 (INJ5)
Saturated or peak and
hold, 3A max
continuous
Injector 5
64 Injector 6 C1-56 Fuel Injector Driver
6 (INJ6)
Saturated or peak and
hold, 3A max
continuous
Injector 6
65 Injector 7 C2-4 Fuel Injector Driver
7 (INJ7)
Saturated or peak and
hold, 3A max
continuous
Injector 7
66 Injector 8 C2-5 Fuel Injector Driver
8 (INJ8)
Saturated or peak and
hold, 3A max
continuous
Injector 8
67 DBW1 Motor - C1-53 Throttle Actuator
Control Motor
(TACM-)
5.0A max Throttle
Control Hbridge Drive
+12V to close
68 DBW1 Motor + C1-54 Throttle Actuator
Control Motor
(TACM+)
5.0A max Throttle
Control Hbridge Drive
+12V to open
69 Coil 6 4P "Coil Driver
2" - 3
Ignition Coil on Plug
Assembly 6 (COP6E)
25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.
70 Coil 1 4P "Coil Driver
1" - 4
Ignition Coil on Plug
Assembly 1 (COP1A) 25 mA max source
current
0-5V Falling edge fire. DO NOT
connect directly to coil primary.
Must use an ignitor OR CDI that
accepts a FALLING edge fire signal.