Apple Xsan 1.4 User Manual
Page 158
158
Appendix A
Combining Xsan and StorNext Clients and Controllers
6
Delete or move the following files from /Library/Filesystems/Xsan/config/:
automount.plist
saninfo.plist
notifications.plist
.auth_secret
Note: If you decide to move this computer to an Xsan SAN with Macintosh controllers,
you need to restore these files to their original location (or reinstall Xsan) before adding
the computer to the Xsan SAN.
7
Force the Xsan software on the Macintosh to read the new fsnameservers file.
Either restart the Macintosh computer or open Terminal and type this command:
$ sudo kill -HUP 'cat /var/run/fsmpm.pid'
8
Mount the file system.
If the file system doesn’t mount automatically, type this command in Terminal:
$ sudo mount -t acfs fsname mountpoint
where
fsname
is the name of the file system and
mountpoint
is the location where the
file system appears on the Macintosh client (
/Volumes/SanVol
, for example).
You can create a mount point by typing
$ mkdir /Volumes/mountpoint