Apple Xsan 1.4 User Manual
Page 70
70
Chapter 2
Setting Up a Storage Area Network
1
In Xsan Admin, select a volume in the SAN Components list and click Start Volume.
2
With the volume still selected, click Clients.
3
Select the controller you’re connected to and click Mount Read & Write.
4
Click Affinities.
5
If the folder doesn’t already exist, click the Add (+) button next to the list.
6
In the dialog that appears, type a name for the folder, choose the storage pool where
the folder (and all files placed in it) will be stored, and click OK.
If the storage pool you want to use is not listed in the Storage Pool Affinity pop-up
menu, it might not be set to allow user data. To check, select the SAN in the SAN
Components list, click Setup, and click Storage. Then select the storage pool, click the
Edit button, and check which data types are enabled next to Use For.
7
Select the new folder and set permissions (below the list).
To change the owner or group, click the Add (+) button and drag a user or group from
the drawer that appears.
8
Click Save.