Apple Xsan 1.4 User Manual
Page 166
166
Appendix B
Using the Command Line
cvadmin Commands
cvadmin command
Description
activate
[volume|index]
Choose the “active” volume that you want to work with
interactively.
volume
– the name of the volume
index
– the numeric ID of the volume (to see a list of these, use
the cvadmin select command without any parameters)
disable pool
[read|write]
Prevent read or write access to a storage pool.
pool
– the name of a storage pool in the currently active
volume.
disks [refresh]
List LUNs.
down pool
Disallow all access to a storage pool.
enable pool
[read|write]
Allow read or write access to a storage pool.
fail (volume|index)
Cause a volume to fail over to a standby controller.
volume
– the name of the volume
index
– the numeric ID of the volume (to see a list of these, use
the cvadmin select command without any parameters)
filelocks [yes|no]
Enable or disable file and record locks. Use the command
without any parameter to see the current setting for locks.
multipath pool
(rotate|static)
Specify how Xsan uses multiple paths to a storage pool.
paths
List available LUNs.
quit
Exit from cvadmin.