Apple Xsan 1.4 User Manual
Page 62
Advertising
62
Chapter 2
Setting Up a Storage Area Network
If existing LUNs are not listed, particularly if they are LUNs you have used before as part
of an old Xsan volume, try removing the old label from the LUN. For instructions, see
“Some LUNs Aren’t Listed in Xsan Admin” on page 146.
2
Select a LUN and click Edit. (You can also just double-click the LUN in the list.)
3
Type a label for the LUN.
4
If the LUN is larger than 2 terabytes (TB) and will be part of a volume mounted only on
clients running Xsan 1.3 or 1.4 on Mac OS X v10.4 Tiger, you can select the option “Allow
LUN to exceed 2 TB capacity.”
5
Click OK
6
Repeat for each unlabeled LUN.
7
Click Save to initialize the LUNs.
Now you can organize the LUNs into storage pools and volumes.
Advertising