Apple Logic Express 9 User Manual
Page 247
To replace or double a recorded drum signal
1
Select the track that you want to modify.
2
Choose Tracks > Drum Replacement/Doubling (or use the corresponding key command).
The following changes take place in the Arrange window:
• All files on the selected audio track are analyzed for transients, if not previously done.
Detected transients are displayed as yellow lines. The selected track is vertically zoomed.
• A software instrument track is created below the selected audio track, and the EXS24
is inserted into the Instrument slot.
• The Library tab is opened in the Media area with the focus set to the EXS24, allowing
you to choose the sound that best matches the project.
• A MIDI region containing trigger notes based on the detected transients is created on
the software instrument track.
247
Chapter 9
Working with Tracks