Apple Logic Express 9 - Manual (Page 251)

The Bounce Regions in Place dialog appears.
3 Define the following parameters, as required.
• Name field: Define a name for the bounce file in the text field. The name defaults to
the region name of the first selected region, with the extension _bip added at the end.
• Destination buttons: Define the track on which the bounce file is placed. You have two
options.
• New Track: Creates a new audio track below the selected track, and places the bounce
file on that track.
• Selected Track: Places the bounce file on the selected track.
• Source buttons: Define what happens to the source regions after bouncing. You have
three options.
• Leave: Leaves the source region unaltered after processing the bounce file.
• Mute: Mutes the source region after processing the bounce file.
• Delete: Deletes the source region from the original track after processing the bounce
file.
• Include Instrument Multi-Outputs checkbox: Select this checkbox to include aux channel
strips with multi-output signals of the software instrument in the bounce process.
Otherwise, only the channel strips of tracks with selected regions are bounced.
251 Chapter 9 Working with Tracks