Apple Logic Express 9 - Manual (Page 639)

While the “Audio to MIDI Groove Template” tab is still open, notice that there are three
fields at the bottom of the Sample Editor—labeled Audio, Quantize, and Result.
• Audio: Displays the quantization points identified in the audio file.
• Quantize: Shows the quantization points selected in the Basis Quantize pop-up menu.
• Result: Shows the quantization positions in the new groove template, which are
produced by the combination of the two values above.
5 Click any audio trigger point to prevent it from being transferred to the template.
Manually selected (unused) points will be dimmed.
6 Click the Try button in the “Audio to MIDI Groove Template” tab to apply the new groove
template to all selected MIDI regions.
7 Listen to the results.
8 Adjust the parameters until you are happy with the resulting groove, and then click Use.
This saves the new groove template, and adds it to the bottom of the Quantize pop-up
menu. The quantize template name is derived from the audio file name.
639 Chapter 21 Quantizing Audio and MIDI