Lull 1044C-54 Series II Operation Manual - Manual (Page 107)

Section 5 - Attachments
5-39 31200608
Installation Procedure:
• Ensure carriage is properly installed. Refer to “Attachment Installation” on
page 5-9.
• Secure the personnel work platform to the forks by sliding the personnel work
platform onto the parent forks and install the retaining pin behind the vertical
shank of the fork.
Preparation and Setup:
1. Ensure the telehandler is on a firm surface and is level.
2. Engage the park brake. Blocking the wheels is also recommended.
3. Level platform, both side to side (frame level) and front to back (attachment tilt).
4. Keep area under platform free from personnel.
5. When personnel are on platform, the operator must remain seated in cab with
personnel in direct line of sight.
6. DO NOT lift or carry persons in a bucket or on forks.
WARNING
FALL HAZARD. Never tilt the platform forward, rearward, or level the machine
when the platform is occupied.