Lull 1044C-54 Series II Operation Manual - Manual (Page 133)

Section 7 - Lubrication and Maintenance
7-23 31200608
Battery
A. Battery Check
John Deere Engine
1. Perform “Shut-Down Procedure” on page 4-4.
2. Open rear access door.
3. Remove strap (1) and battery box cover (2).
4. Wearing eye protection, visually inspect the battery. Check terminals for
corrosion. Replace battery if it has a cracked, melted or damaged case.
5. Replace battery box cover and secure with strap.
6. Close and secure rear access door.
50
OW0980 OW1080
OV0590
1
2