Lull 1044C-54 Series II Operation Manual - Manual (Page 87)

Section 5 - Attachments
5-19 31200608
Installation Procedure:
• Refer to “Attachment Installation” on page 5-9.
Operation:
• Approach load with forks centered on load and stop telehandler.
• Level telehandler before side shifting carriage to engage load.
• Side shift carriage to left or right to align forks with load and engage load.
• Raise load slightly and level carriage side to side.
• Travel in accordance with the requirements set forth in Section 1 - General
Safety Practices.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD. Do not use side shift to push or pull objects or load. Failure to
comply could cause object or load to fall.