Sample capacity chart, Sample capacity chart -5, Warning – Lull 1044C-54 Series II Operation Manual User Manual
Page 73
Section 5 - Attachments
5-5
31200608
Sample Capacity Chart
Note: This is a sample capacity chart only! DO NOT use this chart, use the one
located in your operator cab.
WARNING
TIP OVER HAZARD. All loads shown on rated capacity chart are based on
machine being on firm ground with frame level (see page 4-6); the forks being
positioned evenly on carriage; the load being centered on forks; proper size tires
being properly inflated; and the telehandler being in good operating condition.
XXXXXXX
XXXXXXXXXX X
=XXXX XX MAX
XX MAX
X
XXXX XX MAX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XXXX XX
XX
OV0320
This Capacity Chart may be used with this model ONLY.
The telehandler model is indicated on the boom or chassis.
Model XXXXX is used for demonstration purposes only.
Boom Extension
Indicator (arc)
Boom Angle
Load zones indicate the
maximum weight that
may be safely lifted.
Load center
must be equal
to or less than
value shown.
Attachment type, weight
and dimensions must be
equal to or less than the
data shown.