Dual fork positioning carriage, Dual fork positioning carriage -20 – Lull 1044C-54 Series II Operation Manual User Manual
Page 88
Advertising
Section 5 - Attachments
5-20
31200608
Dual Fork Positioning Carriage
Use Carriage Load Chart
To determine maximum capacity, refer to “Telehandler/
Attachment/Fork Capacity” on page 5-3.
The middle joystick (1) controls lift/lower and extend/retract movement of the boom.
The front joystick (2) controls fork tilt.
• Move joystick back to tilt up
• Move joystick forward to tilt down.
To Fork Position:
The auxiliary hydraulic button (3) controls fork position.
• While depressing button, move joystick left to shift forks out.
• While depressing button, move joystick right to shift forks in.
OZ3670
OV0680
Advertising