Eppendorf Mastercycler pro - Manual (Page 35)

Operation
Mastercycler pro
English (EN)
35
5.4 Overview of operation with the control panel
5.4.1 Navigation tree overview
1 Window title
Displays the current level (user level, cycler level,
top level) in the navigation tree and the title of
dialog windows. A status symbol is displayed on
the right-hand side of the window title if the
external storage medium (MMC or USB) is
accessed.
2 Main node
Eppendorf is the main node containing all the
other nodes.
3 User node
The main node contains a user node for each user
who has been set up. You can store folders and
programs below your own user node. You can
start the programs in your own user node on
every cycler that is connected.
4 Cycler node
Each cycler that is connected and switched on is
displayed by a separate cycler node. Here you
can open the status view of the respective cycler
and access additional cycler-specific functions.
The numbering corresponds to the address of the
cycler.
5 System node
This node contains the most important system
settings. Some settings can only be edited by the
administrator.
6 MMC and USB nodes
These two nodes are only visible if an appropriate
storage medium is inserted into the control panel.
These nodes can be used to access external
storage media (MMC or USB), e.g. for
transferring programs to a different control panel
or for a system backup.
1
2
4
5
6
3