Eppendorf Mastercycler pro - Manual (Page 45)

Programming
Mastercycler pro
English (EN)
45
6.3.2 Editing parameters
1. Use the arrow keys to mark the desired program step.
The marked program step is highlighted in blue.
You can make the settings for temperature, hold time and number of repetitions directly in this view.
Changing the temperature
2. Use the arrow keys to mark the temperature.
3. Use the numerical keys to enter a new value between 4.0 °C and 99.0 °C (in increments of 0.1 °C).
4. Confirm by pressing the Enter key.
Changing the hold time
5. Mark the hold time.
6. Use the numerical keys to enter a new value between 000:00 to 999:59 (mmm:ss, in increments of 1 s).
7. Confirm by pressing the Enter key.
Changing the number of cycles
8. Mark the value for the repetitions.
9. Use the numerical keys to enter the number of repetitions (1 to 99).
10. Confirm by pressing the Enter key.
You can change other parameters for the marked program step:
Extended options
11. Press the Options function key.
The extended parameter settings for the marked program step are displayed.
The temperature is highlighted in blue.
The hold time is highlighted in blue.
The value is highlighted in blue.