JLG 800A_AJ Operator Manual - Manual (Page 101)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121627 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual .............................................3121628
Illustrated Parts Manual ................................................................3121629
6.2 OPERATING SPECIFICATIONS AND PERFORMANCE
DATA
Operating Specifications
Table 6-1. Operating Specifications
Travel Speed 3.0 MPH (4.83 Km/hr.)
Gradeability
2WD
4WD
30%
45%
Turning Radius (Outside)
2WS
4WS
19’8" (6.02 m)
11’7" (3.53 m)
Turning Radius (Inside)
2WS
4WS
12’6" (3.8 m)
6’ (1.83 m)
Overall Width 8’2" (2.48 m)
Tailswing 8’4" (2.56 m)
Ground Clearance 11" (28 cm)
Machine Height Stowed 9 ft. 9.5 in.(2.98 m)