11 torque specifications, 12 lubrication specifications, Hydraulic oil – JLG M450 ANSI Service Manual User Manual

Page 18: 13 critical stability weights, Torque specifications -4, Lubrication specifications -4, Hydraulic oil -4, Critical stability weights -4, Torque requirements -4, Mobil dte 11m specs -4

Advertising
background image

SECTION 1 - SPECIFICATIONS

1-4

– JLG Lift –

3121127

1.11 TORQUE SPECIFICATIONS

1.12 LUBRICATION SPECIFICATIONS

Refer to Section 1.17, Operator Maintenance & Lubrica-
tion, for specifi
c lubrication procedures.

Hydraulic Oil

NOTE: Hydraulic oils must have anti-wear qualities at least

to API Service Classification GL-3, and sufficient
chemical stability for mobile hydraulic system ser-
vice.

Aside from JLG recommendations, it is not advis-
able to mix oils of different brands or types, as they
may not contain the same required additives or be
of comparable viscosities. If use of hydraulic oil
other than Mobil DTE 11M is desired, contact JLG
Industries for proper recommendations.

1.13 CRITICAL STABILITY WEIGHTS

DO NOT REPLACE ITEMS CRITICAL TO STABILITY WITH ITEMS
OF DIFFERENT WEIGHT OR SPECIFICATION (FOR EXAMPLE: BAT-
TERIES, FILLED TIRES, PLATFORM) DO NOT MODIFY UNIT IN
ANY WAY TO AFFECT STABILITY.

Table 1-14. Mobil DTE 11M Specs

ISO Viscosity Grade

#15

Gravity API

31.9

Pour Point, Max

-40°F (-40°C)

Flash Point, Min.

330°F (166°C)

Viscosity

at 40° C

15 cSt

Table 1-12. Torque Requirements

Description

Torque Value

Interval Hours

Wheel Lugs

170 ft. lbs.

(230 Nm)

150

Swing Bearing
(Loctite)

190 ft. lbs.

(260 Nm)

50/600*

* Check swing bearing bolts for security after
first 50 hours of operation and every 600 hours
thereafter.

Table 1-13. Hydraulic Oil

Hydraulic System

Operating

Temperature Range

S.A.E. Viscosity

Grade

+0° to + 180° F

(-18° to +83° C)

10W

+0° to + 210° F

(-18° to +99° C)

10W-20, 10W30

+50° to + 210° F

(+10° to +99° C

20W-20

at 100° C

4.1 cSt

at 100° F

80 SUS

at 210° F

43 SUS

cp at -30° F

3.200

Viscosity Index

140

Table 1-14. Mobil DTE 11M Specs

ISO Viscosity Grade

#15

Gravity API

31.9

Pour Point, Max

-40°F (-40°C)

Flash Point, Min.

330°F (166°C)

Table 1-15. Mobil EAL 224H Specs

Type

Biodegradable Vegetable Oil

ISO Viscosity Grade

32/46

Specific Gravity

.922

Pour Point, Max

-25°F (-32°C)

Flash Point, Min.

428°F (220°C)

Operating Temp.

0 to 180°F (-17 to 162°C)

Weight

7.64 lb. per gal.

(0.9 kg per liter)

Viscosity

at 40° C

37 cSt

at 100° C

8.4 cSt

Viscosity Index

213

NOTE: Must be stored above 32°F (0°C)

Table 1-16. Critical Stability Weights

Component

LB.

KG.

Counterweight

3850

1746

Tire & Wheel (foam-filled)

207

94

Platform (4ft [1.2 m])

90

41

Platform (5 ft [1.5 m])

100

45

Battery (each)

120

54

Advertising
This manual is related to the following products: