JLG M450 ANSI Service Manual - Manual (Page 238)

SECTION 7 - BASIC TROUBLESHOOTING, ELECTRICAL INFORMATION, & SCHEMATICS
7-24 – JLG Lift – 3121127
3. After all required contacts have been inserted, the
wedge lock must be closed to its locked position.
Release the locking latches by squeezing them inward
(See Figure 7-8.).
4. Slide the wedge lock into the housing until it is flush
with the housing (See Figure 7-9.).
Figure 7-7. Connector Assembly Figure 2
Figure 7-8. Connector Assembly Figure 3
Figure 7-9. Connector Assembly Figure 4