JLG M450 ANSI Service Manual User Manual
Page 149
Advertising
SECTION 4 - BOOM & PLATFORM
3121127
– JLG Lift –
4-37
2. Parts used: Bracket Center Pin and Center Pin Snap
Ring.
3. Take the new bracket and install bracket center pin
and snap ring. Repeat on the other bracket if replac-
ing it as well.
NOTE: When installing snap rings make sure they are
seated in pin groove and closed properly.
CLOSED SNAP RING
SNAP RING NOT
CLOSED PROPERLY
Advertising
This manual is related to the following products: