Daily walk-around inspection - sheet 4 of 4 -9 – JLG 150HAX Operator Manual User Manual
Page 29
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
3121213
– JLG Lift –
2-9
25. Boom Limit Switches - Properly secured; no damage
to cams or switches; cams free from excess dirt and
grease.
26. Boom Sections - No visible damage; wear pads
secure; boom chain adjusting nuts secure and
undamaged; lift and telescope cylinders - rod end
shafts and barrel end shafts properly secured; no evi-
dence of leakage; evidence of proper lubrication.
27. Hydraulic Oil Supply - Recommended oil level.
(Check level with cold oil, systems shut down,
machine in stowed position.) Cap secure and in place.
28. Oil Filter Housing - See Inspection Note.
29. Hydraulic Oil Breather - Element in place; not
clogged; no visible signs of overflow.
30. Fuel Supply - Fuel filler cap secure. Tank - See
Inspection Note.
31. Platform Pivot and Slave Cylinder Attach Pins - See
Inspection Note.
32. Frame - No visible damage; no loose or missing hard-
ware (top and underside).
Figure 2-4. Daily Walk-Around Inspection - Sheet 4 of 4