JLG 150HAX Operator Manual - Manual (Page 60)

SECTION 4 - MACHINE OPERATION
4-8 – JLG Lift – 3121213
4.7 PLATFORM
Loading From Ground Level
1. Position chassis on a smooth, firm and level surface.
2. If total load (personnel, tools and supplies) is 500 lbs.
(227 kg) or less for single capacity use, distribute load
uniformly on platform floor and proceed to work posi-
tion. If total load (personnel, tools and supplies) is 1,000
lbs. (454 kg) or less for dual capacity use and machine
is within proper capacity location, distribute load uni-
formly on platform floor and proceed to work position
Loading From Positions Above Ground Level
Before loading weight to platform above ground level:
1. Determine what the total weight will be after additional
weight is loaded (personnel, tools and supplies).
2. If total weight in platform will be 500 lbs. (227 kg) or less
for a single capacity machine, proceed with adding
weight. If total weight in platform is 1,000 lbs. (454 kg) or
less for dual capacity machine and machine is within
proper capacity location, distribute load uniformly on
platform floor and proceed to work position
Platform Level Adjustment
1. Leveling UP. To raise platform, position LEVEL control
switch to UP and hold until platform is level.
2. Leveling DOWN. To lower platform, position LEVEL con-
trol switch to DOWN and hold until platform is level.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD
CAUSE THE LOAD/OCCUPANT TO SHIFT OR FALL. FAILURE TO DO SO
COULD RESULT IN DEATH OR SERIOUS INJURY.
Platform Rotation
1. To rotate platform to the left, position ROTATE control
switch to LEFT and hold until desired platform position
is reached.
2. To rotate platform to the right, position ROTATE control
switch to RIGHT and hold until desired platform position
is reached.