JLG 150HAX Operator Manual User Manual
Page 52
SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-16
– JLG Lift –
3121213
NOTE:
For engine starting, the footswitch must be in the released
(up) position. Footswitch must be actuated in order for
controls to function.
NOTE:
The platform gate must be latched in order to operate the
machine. A platform gate limit switch disconnects power
to the ignition switch when the gate is not latched.
27. Footswitch (Not Shown)
A safety feature makes it necessary to depress the foot-
switch to allow operation of the controls.
TO AVOID SERIOUS INJURY, DO NOT REMOVE, MODIFY OR DISABLE
THE FOOTSWITCH BY BLOCKING OR ANY OTHER MEANS.
FOOTSWITCH MUST BE ADJUSTED SO THAT FUNCTIONS WILL OPER-
ATE WHEN PEDAL IS APPROXIMATELY AT ITS CENTER OF TRAVEL. IF
SWITCH OPERATES WITHIN LAST 1/4" OF TRAVEL, TOP OR BOTTOM, IT
SHOULD BE ADJUSTED.