Walk - around inspection points (sheet 2) -11 – JLG 80SL Operator Manual User Manual
Page 33
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
3121324
– JLG Lift –
2-11
13. Hydraulic Reservoir - Recommended hydraulic fluid
level on level indicator on tank. Breather cap secure
and working.
14. Tie Rod and Spindle - (left front) - See Note
15. Outrigger - (left front) - See Note
16. Scissor Arms and Sliding Wear Pads (Not Shown) -
See Note
17. Control Valve - No unsupported wires or hoses; no
damaged or broken wires.
18. Ground Controls - Placard secure and legible, control
switches return to neutral position, emergency stop
switch functions properly.
19. Platform Control Console (mounted on platform rail) -
Placard secure and legible, control lever and switches
return to neutral, trigger switch and emergency stop
switch function properly, operation and safety manual
in storage box.
20. Platform/Handrail Installation (Not Shown) - See Note.
Ensure all rails and hardware are properly installed.
Figure 2-4. Walk - Around Inspection Points (Sheet 2)