JLG 600A_AJ Operator Manual User Manual
Page 51
SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121615
– JLG Lift –
3-7
NOTE:
Main Lift, Tower Lift, Swing, Platform Level, Main Tele-
scope, Tower Telescope, Platform Rotator and Auxiliary
Power control switches are spring-loaded and will automatically
return to neutral (off) when released.
WHEN OPERATING THE BOOM ENSURE THERE ARE NO PERSONNEL AROUND OR
UNDER PLATFORM.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR
TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE
OFF POSITION WHEN RELEASED.
9.
Swing Control
Provides 360 degrees continuous
turntable rotation.
10.
Tower Lift
This switch provides raising and low-
ering of the tower boom. This func-
tion works only when the tower
boom is fully retracted.
11.
Main Boom Lift Control
Provides raising and lowering of the
main boom.
12.
Main Telescope Control
Provides extension and retraction of
the main boom.